SPECIFICATIONS

Brand Name: NoEnName_Null

Hign-concerned Chemical: None

Origin: Mainland China

Model Number: Solar Lamp Controller Circuit Board

Certification: none

Is Smart Device: no

Choice: yes

Features: 
1.Compatible with 3.2v lithium iron phosphate batteries and 3.7v lithium batteries
2.Can be used for retrofitting or repairing solar integrated street lights
3.Microwave induction fully lit for 10 seconds, then turned to slightly lit
4 Multi mode low light long light, can be timed
5.Easy and convenient to use, suitable for various diy operations

Parameters:
Red board
Rated voltage: 3.2v/3.7v
Application led voltage: 2.8v-3.3v
Power:< 10w (falsely labeled 60w on the market)
Maximum input of solar panel: 5v-6v<30w
Induction method: light controlled induction+radar human body induction
Sensing time: high brightness for about 10 seconds+low brightness for long on/off
Sensing distance: about 5-10 meters
Function: timed radar conversion function
Module size: 65mm*20mm
Remote control size: 104mm*37.5mm
Function: timed rear shell to radar function

Green board
Rated voltage: 3.2v/3.7v
Application led voltage: 2.8v-3.3v
Led power:< 8w (falsely labeled 60w on the market)
Maximum input of solar panel: 5v-6v<20w
Induction method: light controlled induction+radar human body induction
Sensing time: high brightness for about 10 seconds+low brightness for long on/off
Induction method: microwave radar induction
Sensing distance: about 5-10 meters
Module size: 84mm*25mm
Remote control size: 104mm*37.5mm
Function: after timing, only brightness can be adjusted and cannot switch to radar mode

Instructions:
Please connect the battery first, then the led light, and finally the solar panel. This control board does not have overcharge or overdischarge protection. Please install a protective board on the battery to prevent overcharge or overdischarge;
This control board does not come with overcharge or over discharge protection connecting the battery requires the battery to come with a protective board, compatible with 3.2v lithium iron phosphate batteries and 3.7v lithium batteries, which can be used for solar integrated street light modification or maintenance.
Microwave induction fully lit for 10 seconds and then turned to slightly lit, the remote control provided with this product does not have a battery installed inside you need to purchase a no. 7 battery locally for use.

Testing precautions:
1.When testing the sensing mode, there should be no moving objects, including hands and feet, within 12 meters around, otherwise they will be detected
2.When multiple sensing modules are together, mutual interference may occur, resulting in insensitive sensing or false triggering
3.The surface of the patch part is the emitting surface, and no adhesive or glue can be stuck on this side, otherwise it will cause a shorter sensing distance
4.The distance between the front and back of the sensor and the metal should not be less than 2cm
5.The surface of the surface mounted component must not be obstructed by metal, otherwise the detection signal cannot be transmitted, resulting in a shorter sensing distance
6. Inductive signals can penetrate glass and plastic walls, etc.

Package include:
Module*1

Remote control (excluding battery)*1